Setup Procedure - HCP LBR100 User And Installation Manual

All manuals and user guides at all-guides.com
Right Wrong

3. Setup procedure

The general procedure to program is as follows:
Scan the command symbol "Program",
Scan one or more parameters,
Scan the command symbol "End" to close procedure.
Example 1. To set RS 232 parameters 9600,N,8,1 (Page 7 - 9)
Scan the barcode "Program",
Scan "9600" "N" "8" "1",
Scan "End".
Example 2. To set additional digit for UPC/EAN (Page 28)
Scan "Program",
Scan "Addenda 5 digit Enable",
Scan "End".
- 8 -