HCP LBR100 User And Installation Manual page 19

Program
8 - 4. Custom setting
Example: If 5 digits from the left are required, scan "Program" "Single edit
mode" "Select from left" "0" "5" "Select from left" "Single edit mode" "Custom
mode enble" "End".
Custom mode Disable*
Full data editing Disable
Full data editing Enable
Example: If 5 digits from the second position are required scan as follows,
"Program" "Full editing Enable" "0" "2" "." "0" "5" "Full editing Enable"
"Custom modem Disable" "End".
All manuals and user guides at all-guides.com
Programming
Single edit mode
Select from left
Select from right
Custom mode Enable
- 19 -