Fujitsu Lifebook N6460 Bios Manual page 9

Drive2 Submenu of the System Menu
The Drive2 submenu identifies what ATA devices are installed.
Info
Type:
Total Sectors:
Maximum Capacity:
F1 Help
ESC Exit
Table 5: Fields, Options and Defaults for the Drive2 Submenu of the System Menu
Menu Field
Type:
LBA Format
Total Sectors:
Maximum Capacity:
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Phoenix TrustedCore(tm) Setup Utility
System Advanced
Drive2 [FUJITSU MHV2160BT PL]
[Auto]]
LBA Format
312581808
160GB SATA2
Select Item
Select Menu
Figure 5. Drive2 Master Submenu
Options Default
■
Auto [Auto]
■
None
--- ---
--- ---
Security Boot
-/Space Change Values
Enter Select Sub-Menu
Description
Selects the hard drive device type. Select Auto to have the type automati-
cally identified by the BIOS at POST. If None is selected, all of the following
Setup items do not appear.
Logical Block Addressing (LBA)
The total number of sectors on your hard disk
The maximum capacity of your hard disk
S y s t e m M e n u
Exit
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F9 Setup Defaults
F10 Save and Exit
9