Fujitsu Lifebook N6010 Bios Manual page 7

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field Options
■
Heads: A number between
1 and 16
■
Sectors: A number between
0 and 63
■
Maximum Display only
Capacity:
LBA and CHS
■
Multi-Sector Disabled
Transfers:
■
2 Sectors
■
4 Sectors
■
8 Sectors
■
16 Sectors
■
LBA Mode Control: Disabled
■
Enabled
■
Transfer Mode: Standard
■
Fast PIO 1
■
Fast PIO 2
■
Fast PIO 3
■
Fast PIO 4
■
FPIO 3 / DMA 1
■
FPIO 4 / DMA 2
■
Ultra DMA Mode: Disabled
■
Mode 0
■
Mode 1
■
Mode 2
■
Mode 3
■
Mode 4
■
Mode 5
Default Description
–— This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
–— This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
–— Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk.
[16 Sectors] This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
[Enabled] Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when Auto
is selected.
[FPIO 4 / Selects the method for moving data to/from the drive. Autotype the
DMA 2] drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
[Disabled] Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
M a i n M e n u
7