Table of Contents
Advertisement
2.
Before Using Your Appliance
Preparing your Dishwasher for first use
• Make sure the electricity and supply water specifications
match the values indicated in the installation
instructions for the machine.
• Remove all packaging material inside the machine.
• Set the water softener level.
• Fill the rinse aid compartment.
Fill the salt
(IF AVAILABLE)
To add softener salt, open the salt compartment cap by
turning it counter clockwise. (1) (2) At first use, fill the
compartment with 1 kg salt and water (3) until it is almost
overflowing. If available, using a funnel (4) will make filling
easier. Replace the cap and close it. After every 20-30 Cycles
add salt into your machine until it fills up (approx. 1 kg).
1
3
Only add water to the salt compartment on first use.
Use softener salt specifically produced for use in dishwashers.
When you start your dishwasher, the salt compartment is
filled with water, therefore put the softener salt in prior to
starting your machine.
If the softener salt has overflowed and you do not start
the machine immediately, run a short washing program to
protect your machine against corrosion.
2
4
Test Strip
Run water
Keep the
through
strip in the
the tap
water (1sec)
(1min.)
NOTE: The level is set to 3 as default. If the water is well water
or has a hardness level above 90 dF, we recommend that you
use filter and refinement devices.
Water Hardness Table
German
French
Level
dH
dF
1
0-5
0-9
2
6-11
10-20
3
12-17
21-30
4
18-22
31-40
5
23-31
41-55
6
32-50
56-90
Water Softener System
The dishwasher is equipped with a water softener which
reduces the hardness in the mains water supply. To find out
the hardness level of your tap water, contact your water
company or use a test strip (if available).
Setting
Push the programme button and hold it down.
Turn on the machine.
Hold down the programme button until "SL" disappears.
The machine will display the last setting.
Set the level by pushing the programme button.
Switch off the machine to save the setting.
4
hardness
Shake the
Wait
strip.
(1min.)
machine.
British
Indicator
dE
0-6
L1 is shown on the display.
7-14
L2 is shown on the display.
15-21
L3 is shown on the display.
22-28
L4 is shown on the display.
29-39
L5 is shown on the display.
40-63
L6 is shown on the display.
Set the
level
of your
1
2
3
4
5
6
Advertisement
Table of Contents
