Table of Contents
Advertisement
Cleaning
Drain Pump
Large food residues or foreign objects which were not
captured by the filters may block the waste water pump. The
rinsing water will then be above the filter.
Warning Risk of cuts!
n
When cleaning the waste water pump, ensure that you do
not injure yourself on pieces of broken glass or pointed
implements.
1.
First, always disconnect the appliance, from the power
supply.
2.
Take out baskets.
3.
Remove the filters.
4.
Scoop out water, use a sponge if required.
5.
Check the area and remove any foreign objects.
6.
Install filters.
7.
Re-insert baskets.
Spray arms
(Fig. 5.5)
Make sure that the spray holes are not clogged and that no
food waste is stuck to the spray arms. If there is any clogging,
remove the spray arms and clean them under water.
To remove the upper spray arm undo the nut holding it in
position, by turning it clockwise, and pulling it downwards.
Make sure that the nut is properly tightened when refitting
the upper spray arm.
13
Fig. 5.5
Advertisement
Table of Contents
