Recording Can't Be Performed - Fujitsu Lifebook N3510 User Manual

Symptom
The remote control
doesn't work
(Continued)
When you attempt to
start Instant MyMedia,
the notebook starts in-
stead
Only certain remote
control buttons respond

Recording can't be performed

Recording does not
start, even when the
[REC] button on the re-
mote control is pressed.
A message indicating
that no disc is inserted is
displayed when the
[REC] button on the re-
mote control is pressed.
Possible Cause
AC adapter for the notebook
is not connected properly.
Strong irradiated light from
fluorescent lamps are ex-
posed to the IR port.
The signals from the remote
control do not reach the IR
port on the notebook.
The notebook is in Standby
mode.
The BIOS setting for Instant
MyMedia is disabled.
TV broadcasts are being re-
corded.
The DVD-RAM disc is not
recognized.
A disc other than a DVD-
RAM disc is installed.
The disc is not inserted
correctly.
The drive tray is not closed.
Remedies
Properly connect the
AC adapter.
Change the orienta-
tion or location of the
notebook.
Position the remote
control so it is in line-
of-sight of the IR
port.
Power down the
notebook.
Change the BIOS set-
ting of Instant My-
Media.
During recording,
most buttons are dis-
abled, with the ex-
ceptions of volume
and pause.
It takes time for the
notebook to identify
a DVD-RAM disc.
Press the [REC] but-
ton again after the
"loading the disc"
message or the re-
cordable time indica-
tor has disappeared
Instant MyMedia will
only record on DVD-
RAM discs. Use a
DVD-RAM disc.
Verify that the disc is
inserted properly
Check that the disc is
lying flat in the media
tray and close the
tray.
Reference
Refer to your
notebook's user
guide.
---
"Top/Front Fea-
tures" on page 7
Refer to your
notebook's user
guide.
Refer to your
notebook's user
guide.
---
---
"Recording TV
programs" on
page 24
Refer to your
notebook's user
guide.
Refer to your
notebook's user
guide.
39