Watching Tv And External Video Without Booting Up; Watching Television; Switching To Tv Mode; Selecting Channels - Fujitsu Lifebook N3510 User Manual

WATCHING TV AND EXTERNAL VIDEO WITHOUT BOOTING UP

Instant MyMedia allows you to watch television and view video from an external device without
activating the notebook's operating system (also called "booting up" the notebook).

Watching Television

Switching to TV Mode

1. Display the main menu of Instant MyMedia ("Starting Instant MyMedia" on page 19).
2. Select TV using the cursor buttons on the remote control, then press the [Enter] button
When Instant MyMedia is switched to TV mode with a DVD-RAM disc inserted in
the notebook, a message confirming the initialization of the disc may be displayed.
If this occurs, select [No], then press [OK]. If you select [Yes], all programs and data
on the disc will be deleted.
3. If the TV is not selected, press the [TV/Video] button on the remote control to switch to
TV mode. Each time the button is pressed, the input signals will cycle from TV -> S-Video
-> Composite Video.

Selecting Channels

1. To select channels with the remote control, use the numeric buttons (0 - 9).
2. To select a channel, press the number of the channel. For channels above 9, press the
sequence of buttons (e.g., channel 42: press [4] + [2]; channel 156: press [1] + [5] + [6].)
3. To select channels using the Channel Up and Channel Down buttons, press Channel Up for
the next highest channel, or Channel Down for the next lowest. Note that if you have
selected to skip certain channels (See "Skipping Channels" on page 18), they will be
skipped when using the Channel Up and Down buttons.

Adjusting the Volume

1. Use the [Vol +] and [Vol -] buttons on the remote control to increase and decrease the vol-
ume. Note that when changing the volume, the screen display may temporarily stop.
2. Adjust the volume to a comfortable level. Do not raise the volume to the point that the
sound is distorted. Doing so could damage the speakers.

Muting the Volume

1. To mute the sound completely, press the [Mute] button on the remote control.
2. To un-mute the volume, press the [Mute] button again.

Changing Audio Mode

Audio mode is selected when sound multiplex broadcasting (such as bilingual broadcasts) is
received through the TV input.
Press the [Audio] button on the remote control to select the audio mode you want. Each time
the button is pressed, the audio will toggle between Mono-SAP, Mono-Main, and Stereo.
20
.