Changing The Play Settings For Dvds; Changing The Region Code; Setting The Play Start Position; Changing A Language Used In Audio And Captions - Fujitsu Lifebook N3510 User Manual

Changing the play settings for DVDs

The status of DVDs to play may be determined by the intention of software
designers. In that case, functions may not work as operated, because Instant
MyMedia is played according to the contents of the disc which the software
designer intended. Refer to the instruction manual for the DVD to be played.

Changing the region code

Each playable region code is set to each DVD, so it cannot be played if this code is not matched
with the region code of playing devices.
If you want to play DVDs with different region codes, the region code of Instant MyMedia can
be changed.
• The change to the region code can be made up to 4 times including changes to
"WinDVD" and "WinDVR" on the notebook. When changes to the region code
have been made 4 times, the code is fixed to the last one, disabling DVDs hav-
ing other region codes from being played. Note that there is no way to change
the fixed region code.
• Region codes cannot be changed while playing DVDs. Press [Stop/Eject] first.
1. Press the [Menu] button to display the menu.
2. Confirm the current region code. The item with a "O" attached on the left side is the region
code that is currently set.
3. Select a new region and press the [Enter] button. Only the DVDs having the region code
newly set can be played.

Setting the play start position

Set the position for starting the play of DVDs.
1. Press the [Menu] button to display the menu and select Auto Resume from the list.
2. In the right column, select the setting you would like and press the [Enter] button.
Start from the beginning: Play from the start of the disc regardless of the position where it
was previously stopped.
Start from last position: Play from the position where the disc was previously stopped.
The change to the setting of auto resume becomes effective after the notebook has
been powered off.

Changing a language used in audio and captions

Audio and captions can be selected from multiple languages depending on the DVD. To change
a language for audio/captions during the play, use the [Audio] button on the remote control.
30