Table of Contents
Advertisement
WARNING
!
Make certain that the machine is not connected
to the power source.
MOVING FENCE
Loosen two ratchet handles. Move the fence to desired
position. Align both scales then tighten ratchet handles.
BORING DEPTH SCALE
The boring depth scale provides inch and metric
graduation. Move the boring head as close as possible
(A) to the part then tighten knob (B). Move the scale knob
(C) to desired position then tighten.
B
C
ADJUSTMENTS
A
Page 13
MOVING BORING HEAD
Using large wood block for support (over 2,5"). Loosen 2
screws (A) and use knob (B) to raise boring head to
desired position
MOTOR ON/OFF SWITCH
1. Lift the switch to start the machine.
2. Push the switch down to turn off the machine.
3. The on/off switch key is designed to prevent
unauthorized use when removed from the switch.
Store in secure place.
B
A
Advertisement
Table of Contents
