Advertisement
Symptom
Possible Cause
Pet is getting out. • Power Cap
Collar
• Computer Collar
properly on the pet.
• Signal field wire has a break.
• Power is not supplied to the
transmitter or power is out.
• Signal field is too narrow.
• Pet needs additional training.
Pet will not
• Signal field is too high.
enter the
• Pet needs additional training.
yard.
Computer
• Power Cap
®
Collar
Unit
Collar
not
• Signal field wire has a break.
responding to
• Power is not supplied to the
signal field
transmitter or power is out.
(loop) wire.
Invisible Fence
million pets. However, there are some precautions you should take.
Warning 1:
Not every pet can be trained to avoid the established boundary. Sometimes even a properly
trained pet may cross the boundary. Therefore, Invisible Fence
Invisible Fence
Brand Distributors and Dealers cannot guarantee the system will, in all
®
cases, keep a client's pet within the established boundary. Accordingly, if a client has
reason to believe that their pet may pose a danger to others, or harm itself, the client
should not rely solely upon the Invisible Fence
pet from crossing the boundary.
Troubleshooting
®
Battery in the Computer
®
Unit is dead or weak.
®
Unit is not fit
®
Battery in the Computer
®
Unit is dead or weak.
Brand pet containment systems have contained over two
®
Action
• Replace the Power Cap
• Properly fit the collar.
• Contact your Invisible Fence
• Make sure transmitter power supply is
plugged in.
• Contact your Invisible Fence
• Contact your Invisible Fence
for additional pet training.
• Contact your Invisible Fence
to check signal field.
• Contact your Invisible Fence
for additional pet training.
• Replace the Power Cap
• Contact your Invisible Fence
• Make sure transmitter power supply is
plugged in.
®
Brand pet containment system to keep the
®
26
®
Battery.
Brand Dealer.
®
Brand Dealer.
®
Brand Dealer
®
Brand Dealer
®
Brand Dealer
®
®
Battery.
Brand Dealer.
®
Brand, Inc., as well as
Advertisement
