Connecting A Compatible Bluetooth Device; Bluetooth Range Information; Selecting A Different Bluetooth Device; Bluetooth Source Settings - Garmin VIEO RV 850 Series Owner's Manual

Connecting a Compatible Bluetooth Device

You can play media from a compatible Bluetooth device using the Bluetooth wireless connection.
You can control the music playback with the media app on a Bluetooth device or using the Fusion-Link remote
control app (Fusion-Link Wireless Remote Control App, page
1 Select the BT source.
2 Select > Connections > Visible to make the stereo visible to your compatible Bluetooth device.
3 Enable Bluetooth on your compatible Bluetooth device.
4 Bring the compatible Bluetooth device within 10 m (33 ft.) of the stereo.
5 On your compatible Bluetooth device, search for Bluetooth devices.
6 On your compatible Bluetooth device, select the stereo from the list of detected devices.
7 On your compatible Bluetooth device, follow the on-screen instructions to pair and connect to the discovered
stereo.
When pairing, your compatible Bluetooth device may ask you to confirm a code on the stereo. The stereo
does not display a code, but it does connect correctly when you confirm the message on the Bluetooth
device.
8 If your compatible Bluetooth device does not immediately connect to the stereo, repeat steps 1 to 7.
The Visible setting is disabled automatically after two minutes.
NOTE: on some Bluetooth devices, adjusting the volume on the device affects the volume level on the stereo.

Bluetooth Range Information

The stereo and Bluetooth wireless devices have a range of 10 m (33 ft.). For optimal performance, the Bluetooth
wireless device should also have a clear line of sight to the stereo.

Selecting a Different Bluetooth Device

When you have more than one Bluetooth device paired to the stereo, you can select a different device when
needed. You can pair the stereo with up to eight Bluetooth devices.
1 With the BT source selected, select
2 Select a Bluetooth device.

Bluetooth Source Settings

With the BT source selected, select
Visible: allows the stereo to be visible to Bluetooth devices. This setting turns off automatically after two
minutes to prevent possible interruption to audio after pairing a Bluetooth device to the stereo.
Remove Device: removes the Bluetooth device from the stereo. To listen to audio from this Bluetooth device
again, you must pair the device again.
Music Playback and Stereo Features
53).
> Connections > Paired Devices.
> Connections.
39