Advertisement
A division of ELK Group International
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation.
If you encounter any installation problems, please don't hesitate to contact us.
Before you begin, please observe all local building codes. Unpack the new
product and inspect for damage. The appearance of your vanity may differ from
the illustrations in this guide. These instructions still apply. Please ensure the
finished wall is straight and plumb and the floor is flat and perpendicular
to the finished wall.
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver
PARTS / HARDWARE INCLUDED
ROUGH-IN DIMENSIONS
FLOOR
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 ET or fax 866.395.8113 any time
Level
4x
4x
M6 x 25 6x
FRONT
31.5" [802mm]
INSTALLATION INSTRUCTIONS
10'
Drill
Tape Measure
2x
LENA
VANITY
V-LENA-32PS
Safety Glasses
FINISHED
WALL
SIDE
17.8" [452mm]
11" [279mm]
06.2019
Advertisement
Table of Contents
Related Manuals for Ryvyr LENA V-LENA-32PS
Summary of Contents for Ryvyr LENA V-LENA-32PS
- Page 1 PARTS / HARDWARE INCLUDED M6 x 25 6x ROUGH-IN DIMENSIONS FINISHED WALL FRONT SIDE 31.5" [802mm] 17.8" [452mm] 11" [279mm] FLOOR 06.2019 For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 ET or fax 866.395.8113 any time...
- Page 2 Tighten two screws on side of shelf. Attach top. Put the top frame on and tighten the four screws in the corners. 06.2019 For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 ET or fax 866.395.8113 any time...
- Page 3 • Avoid using silicone cleaners and waxes. • Please note that some strong or abrasive chemicals may damage the finish and will void the warranty. 06.2019 For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 ET or fax 866.395.8113 any time...
Need help?
Do you have a question about the LENA V-LENA-32PS and is the answer not in the manual?
Questions and answers