Advertisement
A divsion of ELK Group International
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you encounter
any installation problems, please don't hesitate to contact us. Before you begin, please
observe all local building codes. Unpack the new product and inspect for damage. The
appearance of your vanity may differ from the illustrations in this guide. These instructions
still apply. Please ensure the finished wall is straight and plumb and the floor is flat and
perpendicular to the finished wall.
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver
ROUGH-IN DIMENSIONS
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 ET or fax 866.395.8113 any time
Level
24" [610.0mm]
INSTALLATION INSTRUCTIONS
10'
Drill
Tape Measure
WAVE
VANITY
V-WAVE-24DK
Safety Glasses
21-1/2" [546.0mm]
TM
02.2017
Advertisement
Table of Contents
Related Manuals for Ryvyr WAVE
Summary of Contents for Ryvyr WAVE
-
Page 1: Installation Instructions
SUGGESTED TOOLS AND MATERIALS Phillips Screwdriver Level Drill Tape Measure Safety Glasses ROUGH-IN DIMENSIONS 24" [610.0mm] 21-1/2" [546.0mm] 02.2017 For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 ET or fax 866.395.8113 any time... - Page 2 • Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of time will cause white spots in the finish. Please note that some chemicals may damage the finish. 02.2017 For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 ET or fax 866.395.8113 any time...
Need help?
Do you have a question about the WAVE and is the answer not in the manual?
Questions and answers