Ryvyr V-PLATTE-36BSNA Installation Instructions

A division of ELK Group International
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation.
If you encounter any installation problems, please don't hesitate to contact us.
Before you begin, please observe all local building codes. Unpack the new
product and inspect for damage. The appearance of your vanity may differ from
the illustrations in this guide. These instructions still apply. Please ensure the
finished wall is straight and plumb and the floor is flat and perpendicular
to the finished wall.

SUGGESTED TOOLS AND MATERIALS

Phillips Screwdriver

PARTS / HARDWARE INCLUDED

ROUGH-IN DIMENSIONS

FLOOR
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 ET or fax 866.395.8113 any time
Level
3x 3x
FRONT
36" [914mm]
35.2" [894mm]
60 x 10 x 1.2mm Tube
INSTALLATION INSTRUCTIONS
V-PLATTE-36BSNA | V-PLATTE-36MBNA
Drill Tape Measure
8x 1x
PLATTE
10'
Safety Glasses
SIDE
21.5" [546mm]
20.7" [526mm]
VANITY
FINISHED
WALL
05.2019