Fujitsu Lifebook C352 Manual page 50

C A U T I O N
Be sure you know which settings are
active for the Power Button before you
use it; misuse can result in data loss. (See
the Power Menu of the BIOS setup utility,
pages 85-92, for more information.)
P O I N T
Save-to-Disk mode requires allocating a
significant amount of hard drive capacity
for saving all system memory, which
reduces your usable disk space. When
you purchase your notebook it will have
space allocated for the memory installed.
If you increase the system memory with
a memory Upgrade module, you will
need to change the size of your Save-to-
Disk allocation. Use the PHDISK Utility to
increase the size of the Save-to-Disk file,
SAVE2DSK.BIN. (Refer to Setting Up
Your Save-to-Disk File Allocation on
U s i n g Y o u r L i f e B o o k C S e r i e s
pages 102-103 for more information.)
If you need help contact your support
representative for recommendations.
Save-to-Disk Mode
The Save-to-Disk function saves the contents of
the notebook's system memory to the hard
drive as a part of the Suspend/Resume func-
tion. Your notebook is setup to perform this
function in one way and can be configured
through the system BIOS to do it in other ways.
Default Method for using Save-to Disk Mode:
Press the Fn key together with the
Suspend/Resume button when activating the
Suspend mode. The Save-to-Disk pop-up
will appear on your screen, simply wait until
it has finished and your notebook will go
into Save-to-Disk mode.
P O I N T
Save-to-Disk mode will not operate
when Resume On Modem Ring has
been selected in the BIOS.
L i f e B o o k C S e r i e s f r o m F u j i t s u
Customer configured BIOS methods:
Press the Power Button until acknowledged
with Save-to-Disk mode enabled from the
Power menu of the BIOS setup utility.
Select Standby from the Windows Shut
Down menu with Save-to-Disk enabled by
the BIOS Setup Utility.
Time out from lack of activity with Save-To-
Disk mode enabled from the Power Savings
menu of the BIOS setup utility.
Your notebook's system memory typically stores
the file(s) on which you are working, the open
application(s) and any other data required to
support the operation(s) in progress. When the
Save-to-Disk function is activated your notebook
saves the contents of the system memory to a file
on the internal hard drive, and then automatical-
ly shuts off power to your notebook. When you
resume operation by pressing the Power button,
you return to the point in the operation
where you left off, before going into
Save-to-Disk mode.
41