Fujitsu Lifebook C352 Manual page 116

To install a PC Card:
1. See your PC Card manual for instructions on
installation of that specific card.
2. Make sure that there is not already a PC
Card in the slot. If there is, eject it, as
described in Removing PC Cards.
C A U T I O N
Some PC Cards can only be installed or
removed with the power Off. Please check
the card documentation for correct usage.
3. Insert the PC Card in the card slot, with the
product name label facing up. (Figure 5-2.)
4. When the PC Card is fully inserted, the eject
button will pop out.
5. Flip this button toward the front of your
notebook to fold it out of the way.
U s e r I n s t a l l a b l e
6. When the card is installed, lock it in place
by sliding the Lock button toward the front
of your notebook. (Figure 5-2.)
Figure 5-2 Installing and Removing a PC Card
L i f e B o o k C S e r i e s f r o m F u j i t s u
F e a t u r e s
C A U T I O N
Installing or removing a card while your
notebook is in the process of going
through the power on or power off
sequence may damage the card and/or
your notebook.
C A U T I O N
Windows 98 has a shutdown procedure
for PC Cards that must be followed
before beginning to remove a card.
109