Loading Media On Your Drive; Removing Media; Using The Media Player Software - Fujitsu Lifebook C2220 User Manual

Brie3-B5FH-8711.book Page 39 Wednesday, May 14, 2003 10:37 AM
P O I N T
You should periodically check the Fujitsu web site at
www.fujitsupc.com for current updated drivers.
All LifeBook DVD players are set to play DVD titles
with region code number 1 which is specified for the
North American market. The region number is a
regional restriction code defined by the DVD Forum
acting on Hollywood requirements. Different region
codes are recorded on video DVD titles for publica-
tion in different areas of the world. If the regional
code of the DVD player does not match the regional
codes on the titles, then playback is impossible.
You can change the region code on the DVD player
using the Properties menu of the DVD software.
Note, however, that you can only change the region
code up to four times. After the fourth change, the
last region code entered becomes permanent, and
cannot be changed.

LOADING MEDIA ON YOUR DRIVE

To load a disc into your optical drive:
1. Push and release the eject button on the front of the
optical drive to open the holder tray. The tray will
come out of the LifeBook notebook a short distance.
2. Gently pull the tray out until a media disc can easily
be placed in the tray.
C A U T I O N
There may be a protective sheet in the tray from when it
was shipped; please make sure it is removed before
operating the drive.
3. Place the media into the tray, label side up, with the
hole in the center of the disc. Snap the disc onto the
raised circle in the center of the tray.
4. Gently push the holder tray back in until you
hear a click. (Figure 4-5)
P O I N T
If you have disabled the Auto Insert Notification
Function, you will have to start the drive from your
desktop, since your LifeBook notebook will not auto-
matically recognize that media has been loaded.
O p t i c a l D r i v e
(a)
(b)
(c)
(d)
Figure 4-5 Loading/Ejecting Media

REMOVING MEDIA

1. Push and release the eject button on the front of
the optical drive. This will stop the drive and the
holder tray will come out of the LifeBook notebook
a short distance.
2. Gently pull the tray out until the disc can easily be
removed from the tray.
3. Carefully remove the media disc from the holder
tray.
4. Gently push the holder tray back in until you hear a
click.

USING THE MEDIA PLAYER SOFTWARE

P O I N T
Depending upon its configuration, your system may not
have the media player software pre-installed. If it is not
installed, reference the documentation that
accompanies the media application.
Starting a DVD Movie (DVD Models only)
1. Insert the DVD movie into your optical drive. If the
CD AutoRun feature activates, skip Step 2.
2a. Windows 2000 only: From the Start menu, select
Programs, then select InterVideo WINDVD and
click InterVideo WINDVD or double-click on the
InterVideo WINDVD icon on the desktop. This will
launch the DVD movie.
2b. Windows XP only: The first time you insert a movie
into the DVD/CD-RW tray, you will be prompted to
select what you want the system to do when discs are
inserted (e.g., start automatically or wait for a
39