Other Settings; Setting Of Power-Saving Function - Fujitsu Lifebook C2220 User Manual

Brie3-B5FH-8711.book Page 64 Wednesday, May 14, 2003 10:37 AM
L i f e B o o k C S e r i e s N o t e b o o k – S e c t i o n F i v e

Other settings

SETTING OF POWER-SAVING FUNCTION

You can set the power-saving function of wireless LAN.
Default setting is auto-setting. In case of using the
power-saving function, manually control the communi-
cation performance.
Setting of channels during ad hoc connection
You can set channels during ad hoc connection. Channel
11 is set by default. When connecting to an existing ad
hoc network, no channel setting will be effective.
This setting is only effective during ad hoc connection; it
will be ineffective during infrastructure connection.
P O I N T
When changing channels during ad hoc connection,
change the channel settings of all connected computers
with the same Network name (SSID) at the same time.
After changing the channels, turn off all computers and
-- after they are all turned off -- turn them back on.
1. Click on the My Computer icon. Select [View sys-
tem information] from the left frame.
2. Select the Hardware tab and click [Device Man-
ager].
3. Double-click "Broadcom BCM4306 Wireless LAN
Adapter" under [Network Adapters].
4. In the Broadcom BCM4306 Wireless LAN Adapter
window, select the Advanced tab.
5. Select IBSS (Independent Basic Service Set) Chan-
nel Number from the list, and change the value
from the [Value:] dropdown list to the desired
channel.
6. Click [OK].
64