Using The [Tray Paper Settings] Menu; Printing A Configuration Page - Sawgrass SG500NA User Manual

Administrator Tools
Check the current firmware of the printer as well as reset all settings to default
Maintenance
Change the Sheet dry delay as well as Paper size error detect and perform De-
condensation
Direct Connection Settings
Access the settings in order to connect directly to the PC.

Using the [Tray Paper Settings] Menu

This section explains the settings you can specify in the [Tray Paper Settings] menu, such
as those for the size and type of the paper loaded in each paper tray, although changes in
this manner are not recommended by Sawgrass.
Tray Paper Size
You can specify the size of the paper loaded in the paper tray.
Sawgrass recommends that you do not change the paper size in this manner since it
may conflict with settings controlled by the printer driver.
Paper Type
You can specify the type of the paper loaded in the paper tray.
Sawgrass recommends that you do not change the type of paper in this manner since
it may conflict with settings controlled by the printer driver.
Using the Control Panel to Make Printer Settings | 45
Tray Priority
You can specify the prioritized paper tray. Default: [Tray 1]
"Aut.Tray Select" can be specified only if the bypass tray or the option tray is attached.
If you select "Aut.Tray Select", the paper tray is automatically selected according to the
paper size and paper type for the paper trays in "Tray Paper Size" and "Paper Type".
"Tray Priority" will be specified only if the option tray is attached.

Printing a Configuration Page

1. Press the [ Menu] key.
2. Press the [▲] or [▼] key to display [Print Features], then press the [OK] key.
3. Press the [▲] or [▼] key to display [List/Test Print], then press the [OK] key.
Setup and Installation | 62