Table of Contents
Advertisement
Removing and installing components during servicing
Removing and installing the hard disk
Removing the hard disk
►
Switch the notebook off and pull the power plug out of the mains socket.
►
Close the LCD screen so that it locks into place.
►
Disconnect all cables connected to the notebook.
►
Turn your notebook over and place it on a sturdy, flat surface.
►
Removing the battery (see "Removing battery").
1
3
►
Loosen the 4 screws on the hard disk frame.
►
Pull the hard disk out of the frame.
52
1
3
2
1
2
4
►
Remove the screws (1).
►
Swivel the cover in the direction of the
arrow (2).
►
Lift the cover off the notebook in the
direction of the arrow (3).
►
Remove the two screws (1) from the frame
of the hard disk.
►
Pull the hard disk by the pulling aid (2)
straight in the direction of the arrow (3).
►
Remove the hard disk with the frame (4)
from the hard disk compartment.
10600736497, edition 3
Advertisement
Table of Contents
