Table of Contents
Advertisement
M
aintenance and care
Clearing the Brush Roll
Make sure the vacuum is unplugged and
in the OFF position.
Note: Obstructions such as
carpet fibers, strings, hair,
throw rugs etc., may shut off
brush roll motor.
1. Turn vacuum over where the underside
of the unit is facing you.
2. Pull out or cut away obstructions from
the brush roll area.
3. Stand vacuum back upright.
4. Plug in unit and turn on switch.
5. Press reset button on top of vacuum
hood to restart brush roll motor.
Clearing the Hose and Wand
Make sure the vacuum is unplugged and in
the OFF position.
1. Remove hose with wand from
vacuum by unscrewing the hose from
the bag housing.
2. Look into hose and wand for any
obstruction.
3. Shake or insert a broom handle to
clear any visible debris.
4. Replace hose and wand on vacuum.
NOTE: Picking up fine powders,
substances, carpet fresh powders,
can clog the filter bag. Please
remember to change the bags
often so that vacuum cleaner can
operate at optimal efficiency. We
recommend that a qualified vacuum
repair specialist at your local service
center repair any maintenance
issues that you may have. To avoid
unnecessary maintenance, regularly
check the bag, filter, and brush roll.
w w w . b i s s e l l c o m m e r c i a l . c o m
WARNING:
Avoid injury. Keep loose clothing,
hair, fingers, and all other parts of the
body away from any moving part.
Disconnect vacuum from electrical
outlet before attempting to service it in
any manner.
1 - 8 5 5 - 5 4 4 - 7 3 3 6
9
Advertisement
Table of Contents
