Table of Contents
Advertisement
O
perations
Filter Bag
1. Make sure that vacuum is unplugged and
in the OFF position.
2. Push black button left of grey carry handle
to open bag cover.
3. Remove used filter bag from vacuum and
discard. DO NOT re-use bag.
4. Insert new disposable bag hole over black
dirt tube opening.
5. Tuck bag into canister.
6. Close cover and snap into place.
Safety Feature – If no bag is put
into machine, the vacuum will not
turn on. This saves the vacuum from
unnecessary damage due to having no
bag filter in the unit.
Motor Intake Filter
1. Make sure vacuum is unplugged and in
the OFF position.
2. Remove filter bag, lift motor intake filter
from the bag housing.
3. Replace filter and put in bag filter.
4. Close cover by snapping into place.
Changing Filter
1. Remove Filter by pushing down lightly on
cover and pull away from unit.
2. Remove any excess foam from filter area.
3. Insert NEW filter. Push lightly on the filter
until the tabs snap into place.
PROTECT YOUR MOTOR – KEEP YOUR
FILTERS CLEAN FOR OPTIMAL EFFICENCY.
8
w w w . b i s s e l l c o m m e r c i a l . c o m
1 - 8 5 5 - 5 4 4 - 7 3 3 6
Advertisement
Table of Contents
