TABLE OF CONTENTS
INTRODUCTION ..................................................................... 2
LISTING .............................................................................. 3
CLASSIFICATION .................................................................. 3
APPLICATION ...................................................................... 3
PART NUMBERS .................................................................. 3
CLEARANCE ......................................................................... 4
SYSTEM SIZING ................................................................... 4
FREIGHT DAMAGE ............................................................... 5
PROPER STORAGE .............................................................. 5
PRODUCT WEIGHTS ............................................................ 5
Special Feature ................................................................... 8
Joint Assembly ................................................................... 8
Sealant Usage ..................................................................... 9
TEES ................................................................................... 16
90° Tee (T90) ............................................................... 16
Lateral Tee (BT) ............................................................ 16
Tee Cap (TC) . .............................................................. 17
ELBOW ............................................................................... 18
TEE SUPPORT ..................................................................... 23
ELBOW SUPPORT ................................................................ 24
NOTE : Dimensions in these instructions are in American standard (feet and inches), with Metric (mm) in parenthesis except where stated otherwise.
Warning!
Failure to follow these installation Instructions could cause FIRE, CARBON MONOXIDE, POISONING, OR DEATH. If you are unsure of Installation requirements, call Phone Number
listed on the front of these instructions.
Caution-Risk of injury. Sheet metal parts may be sharp. Always wear gloves and appropriate eye, foot, and other protection when handling these products.
Flashing (F) ...................................................................... 25
Flip Top (FT) ................................................................ 28
Miter Cut (MC) ............................................................ 28
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
ACCESSORIES ................................................. 28
2