Advertisement
Thread the supply hose onto the fill
valve shank.
Slide nut of inlet cover onto the supply
hose, with flared end last and run hose
through toilet wall.
Take hose guide apart and slide onto
the supply hose, with the flared end
last. Slide the two inserts into the
flared end of the hose guide. Insert
into toilet wall and tighten nut.
Carefully align and lower the bowl.
Apply weight to the bowl rim to let the
outlet insert into plastic trap.
1392769-T01-A
Hose Guide
Outlet
Plastic Trap
Fig.#9
9
Fig.#10
10
Fig.#11
11
Fig.#12
12
-5-
Advertisement
