Maintenance Instructions; Maintenance Schedule - Kohler Command PRO CV732 Service Manual

Hide thumbs Also See for Command PRO CV732:
Table of Contents

Advertisement

MAINTENANCE INSTRUCTIONS

Accidental Starts can cause severe injury or
death.
Disconnect and ground spark plug lead(s)
before servicing.
Normal maintenance, replacement or repair of emission control devices and systems may be performed by any repair
establishment or individual; however, warranty repairs must be performed by a Kohler authorized dealer.

MAINTENANCE SCHEDULE

Weekly
● Check air cleaner element.
Every 100 Hours or Annually¹
● Change oil.
● Remove cooling shrouds and clean cooling areas.
● Check oil cooler fins, clean as necessary (if equipped).
Every 200 Hours
● Change oil filter.
● Replace fuel filter.
Every 250 Hours¹
● Replace air cleaner element and check inner element.
Every 500 Hours¹
● Replace air cleaner inner element.
● Replace spark plugs and set gap.
Every 500 Hours
2
● Have crankshaft spline lubricated.
Perform these procedures more frequently under severe, dusty, dirty conditions.
1
Have a Kohler authorized dealer perform this service.
2
REPAIRS/SERVICE PARTS
Kohler genuine service parts can be purchased from Kohler authorized dealers. To find a local Kohler authorized
dealer visit KohlerEngines.com or call 1-800-544-2444 (U.S. and Canada).
24 690 37 Rev. B
WARNING
KohlerEngines.com
Before working on engine or equipment, disable engine as
follows: 1) Disconnect spark plug lead(s). 2) Disconnect
negative (–) battery cable from battery.
Maintenance
Air Cleaner/Intake
Lubrication System
Air Cleaner/Intake
Lubrication System
Lubrication System
Air Cleaner/Intake
Air Cleaner/Intake
Electrical System
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Command pro cv682Command pro cv742Command pro cv752

Table of Contents