Advertisement
Quick Links
Advertisement
Related Manuals for Saferhomee HB-5050G
Summary of Contents for Saferhomee HB-5050G
- Page 1 Manual Of Networking Alarm Panel HB-5050G NINGBO HENGBO TELECOMMUNICATION CO.,LTD...
- Page 2 网络报警主机使用说明...
- Page 3 网络报警主机使用说明 Connections of cables Outputs Jumpers(Disable)：used to control the warning board status +12: If AC powered,work normally;If DC powered,work abnormally OUT: Alarming Mode,the warning board will light; Arm or Disarm Mode,the warning board will blink; Warning Board Interface：DC12V/0.5A outputs Siren Interface：DC12V/0.5A outputs Power Interface:DC15V/1.5A SIM Card Slot: Only 2G SIM Card is available(Mini SIM) Set Button: Restore to the factory default...
- Page 4 网络报警主机使用说明 Instructions LCD Display: -01/01 (01Blinking) On Setting Mode Restored to factory default Connected to Server Success No Display Static working status,alarm panel has been connected the detectors or remote controls -XX (-Blinking) learning detector status（XX：01…99 zone number） Learned detector success （ XX： 01…99 zone number） Alarm（XX：01…99 zone number）...
- Page 5 网络报警主机使用说明 APP Operation Manual App Interface(Home): All Arm: On receiving all the alarm information mode Disarm: On not receiving normal alarm information mode Part Arm: Disable Mute: Make the app silence when alarm SOS：Emergency Help...
- Page 6 网络报警主机使用说明 Account Setup(Account) Press”Account”--- enter password:123456 SIM Card of the alarm panel supports SMS? Alarm Panel ID：Fill the 15-digits Serial Number/Scan the OR Code Phone Number：The SIM Card number of the phone installed the App Setup Password：123456 Press”Submit “...
- Page 7 网络报警主机使用说明 Alarm Panel Setup(Settings)
- Page 8 网络报警主机使用说明 Phone Number Total 4 groups phone number can be set Standard Alarm Center SMS Number:Disable Transfer Alarm Center SMS Number:Disable...
- Page 9 网络报警主机使用说明 Detector Select the zone number(1--99) Select the zone type(Normal,Emergency,Fire,Help,Gas,Water) Fill the Notes and save the notes Press”Match “----and then trigger the detector once...
- Page 10 网络报警主机使用说明 Remote Control Select the remote control(1#--4#) Press “+” to add the remote control Press “-” to delete the remote control...
- Page 11 网络报警主机使用说明 Timing Time Query Timing Time: Querythe last timing time 2 groups of arm/disarm time can be set...press”√ ”to confirm.
- Page 12 网络报警主机使用说明 Password Note:The password should be 6-digits Ademco ID &Server’s Domain Address are used to communicate with the SAFERHOMEE Alarm Software...(Disable) Time(Disable)
Need help?
Do you have a question about the HB-5050G and is the answer not in the manual?
Questions and answers