Connecting A Dvd Player/Recorder - Yamaha YRS-2000 Owner's Manual

Connections

Connecting a DVD player/recorder

Connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL INPUT jack on
this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on
your DVD/VCR combo player/recorder to the VCR AUDIO INPUT jacks on this unit in addition to the coaxial digital
audio connection.
Notes
• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system
settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
• If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see
page 22).
Video signal to the TV
Audio
Audio pin cable
Digital audio pin cable
18
En
AUDIO INPUT
OUT
L
R
VCR TV/STB VIDEO
*
For the DVD/VCR
combo player/recorder
connection
R L
Analog
audio
output
DVD player/recorder
Rear panel of this unit
DIGITAL INPUT
COAXIAL
OPTICAL
TV/STB AUX DVD
Coaxial
digital
output