Connections; Connecting The Power Cord - Yamaha SWX3220-16MT User Manual

4. Connections

4.1. Connecting the power cord

1. Attach the included power cord clamp.
To prevent accidental disconnection of the power cord, insert the included power cord clamp
into the power cord clamp holes of the product to secure the power cord.
Caution

• The included power cord clamp is only for the included power supply cord.
• If you use the clamp for other power cords aside from that which was included,
the cord might be damaged or might not be properly secured.
2. Connect the included power cord to the power supply inlet, and secure it with the clamp.
3. Connect the power cord to an electrical outlet.
The POWER indicator lights up green.
Caution
If the POWER indicator is lit orange, one of the following errors has occurred. Check
the error situation and deal with it appropriately.
• Fan stopped
Stop using this product immediately and contact the dealer where you
purchased this product to have the product inspected and/or repaired.

• Internal temperature error
Review the environment in which this product is installed, and correctly install
this product so that the internal temperature is at an appropriate level.
• Corruption of config save area
The config information cannot be read correctly at startup.
Contact the dealer where you purchased this product to have the product
inspected and/or repaired.
L3 SWITCH SWX3220-16MT User Guide | 19
4. Connections