Ventilation System
This Convection Microwave Hood is designed for
adaptation to three types of hood ventilation systems.
Select the type required for your installation.
RECIRCULATING — non-vented, ductless.
Follow installation procedure (A). Recirculating requires
the use of the Charcoal Filter, which has been installed
in the oven.
HORIZONTAL EXHAUST — outside ventilation.
Follow installation procedure (B).
VERTICAL EXHAUST — outside ventilation.
Follow installation procedure (C).
(A) Recirculating: Non-vented,
Ductless Operation
• The unit is shipped assembled for recirculating.
• The Exhaust Damper Assembly is NOT REQUIRED for
recirculating exhaust.
• Charcoal Filter, included with the unit, IS REQUIRED
for recirculating exhaust.
(B) Horizontal Exhaust: Outside
Ventilation
HORIZONTAL EXHAUST: Remove and save 4 screws.
Remove fan cover bracket.
(Preparing Oven for Installation)
Fan Cover
Bracket
HORIZONTAL EXHAUST: Withdraw hood fan unit
carefully and slip wires out of wire box.
HORIZONTAL EXHAUST: Rotate hood fan unit 180˚ so
that exhaust ports are facing rear of oven unit.
• CAUTION: Do not pull or stretch hood fan wiring.
• Replace hood fan unit into the oven unit. Be careful
not to pinch the lead wire between the inner bracket
and the hood fan unit.
• Put the lead wire into wire box.
E4
Hood Fan
Unit
Hood Fan
Unit