Table of Contents
Advertisement
3
Using the Device
while the auto stop feature is activated, the
auto stop function will be disabled and the
engine of the device will stop. This feature
will be disabled when you switch to different
speed levels. In order for your device to stop
automatically, it is necessary to activate the
automatic stop feature again.
3.5 Lamp change
If the lamp of your device fails, contact the
authorized service for lamp replacement.
Bulb
Bulb Power (W) 6.7 W
Bulb Voltage
220 - 240
(V)
Size (mm)
294
ILCOS Code
DBL-3/840-220/240-
FP-12/294
3.6 Chimney Mounted Use
Vapors are discharged
•
through the flue pipe fixed
to the connection head on
the device.
The diameter of the flue pipe should be
•
equal to the connecting ring. In hori-
zontal arrangements, the pipe should
be slightly inclined upwards (about 10º)
in order to let the air out of the room
easily.
3.7 Chimney Free Use
The air is filtered through
•
the carbon filter and sent
back to the room. Carbon
filter is used in cases where
it is impossible not to have a chimney in
the house.
10 / EN
When using chimney free, remove the
•
flaps on the flue adapter.
Remove the aluminum oil filter. To install
•
the carbon filter, center the carbon filter
on the tabs on the plastic part on both
sides of the fan body. Tighten by turning
to the right or to the left.
Reinstall the aluminum oil filter.
•
Hood / User Manual
Advertisement
Table of Contents
