Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko HCA93640SS
Summary of Contents for Beko HCA93640SS
- Page 1 Hood User Manual HCA93640SS...
- Page 2 Please read this user manual first! Dear Valued Customer, Thank you for preferring this Beko appliance. We hope that you get the best results from your appliance which has been manufactured with high quality and state-of-the- art technology. For this reason, please read this entire user manual and all other ac- companying documents carefully before using the appliance and keep it as a reference for future use.
-
Page 3: Table Of Contents
CONTENTS 1 Important safety and environmental instructions 1.1 Safety instructions ....4 1.2 Compliance with WEEE regulation and disposal of waste product ....6 1.3 Packaging of the product . -
Page 4: Important Safety And Environmental Instructions
• structions shall void any warranty. appliance. Cleaning and user maintenance shall not be made by children without su- Beko products comply with the applicable • pervision. safety standards; therefore, in case of any damage on the appliance or power cable, The minimum distance between the sup- •... - Page 5 Important Safety and Environmental Instructions plug is always accessible. product is running. Do not touch the lamps if they have oper- In the event of be started any flame, • • ated for a long time. They can burn your de-energize your product and cooking ap- hands since they will be hot.
-
Page 6: Compliance With Weee Regulation And Disposal Of Waste Product
Important Safety and Environmental Instructions 1.2 Compliance with the WEEE Di- used simultaneously with the devices op- rective and Disposing of the Waste erating on gas or other fuels (this may not Product: apply to appliances that only discharge the air back into the room). -
Page 7: Packaging Of The Product
Important Safety and Environmental Instructions 1.3 Compliance with RoHS Directive The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive. 1.4 Package Information Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. -
Page 8: General View
2. Outer Chimney 3. Aluminum Oil Filter (Behind the Glass Cover) 4. Glass Cover 5. Oven Lighting 2.2 Technical Data Model HCA93640SS Supply Voltage 220-240V ~ 50 Hz Lamp Power (W) 6.7 W Engine Power (W) 275 W Flow rate (m³ / h) - 3. Grade... -
Page 9: Using The Device
Using the Device 3.1 Device Control (1) Lamp On / Off You can illuminate the cooking space by pressing this button. Press this button again to turn off illumination. (2) 1. Level Key By pressing this button, you enable the device to operate at the 1st speed level. When you press this button again to turn off the device, the screen and the speed level areclosed. -
Page 10: Lamp Change
Using the Device while the auto stop feature is activated, the When using chimney free, remove the • auto stop function will be disabled and the flaps on the flue adapter. engine of the device will stop. This feature Remove the aluminum oil filter. To install •... -
Page 11: Cleaning And Maintenance
Cleaning and Maintenance 4.2 Replacing Carbon Filters Unplug the device or turn off the switch before cleaning There are charcoal (activated carbon) in the deodorizing filters. In all cases, whether or and maintenance. not a carbon filter is used, aluminum oil filters must be installed in the product. -
Page 12: Device Installation
Device Installation 5.2 Mounting Accessories WARNING! Read the safety information in the User Manual before starting the installation. WARNING! Failure to install with screws and fasteners according to these instructions may result in electric shock. For the installation of the device, please contact the nearest Authorized Service. -
Page 13: Installation Of Your Hood On The Wall
Device Installation 5.3 Installation of Your Hood on plate on the line you draw perpendicular the Wall to the wall. Align it horizontally and mark the holes on which the chimney connec- • The wall should be flat, upright and of tion sheet will be mounted with a pencil sufficient bearing strength. -
Page 14: Connecting To The Chimney
Device Installation If you are going to use Ø 120/150 mm plastic flue adapter, connect one end of the pipe to this adapter, or if you will not use it, directly to the outlet on the product. Connect the other end of the pipe to your chimney. -
Page 15: Hood Chimney Installation
Device Installation 5.5 Hood Chimney Installation Before starting the flue assembly, make the electrical connection of your product. Thread the plate chimneys Around the body. Screw the outer flue to the outer flue connection plates on the engine cab- in. (Figure 12) Extend the inner chimney from the up- per outer edges to the chimney mounting plate fixed to the wall and screw it on. -
Page 16: Troubleshooting
Troubleshooting Troubleshooting Reason Help The product does Check your fuse. Your fuse might be closed, not work. make it work. The product does Check the electrical connection. The mains voltage should be not work. between 220-240 V. The product does Check the electrical connection. - Page 17 www.beko.com...