BTC 9039ARF III Quick Installation Manual

Wireless Keyboard & USB dongle /9039ARF III / BTC / EMPREX

Hardware Installation

1. Plug the dongle receiver connector into your available USB port on PC.
2. Make sure the batteries of the keyboard are installed correctly. Please follow
the polarity signs in the battery compartment.
Note:
After you plug the receiver USB connector into your PC USB port, please
hold the keyboard close to the receiver within 1m and press any key to pair
ID.

ID Pairing Procedure

If it can't work, please follow the steps below to process the ID pairing procedures.
The ID-recognition function helps to protect against interference from other RF
products. Remember to follow the steps below to change ID when other RF
products affect your keyboard kit.
ID pairing/connect button location:
Receiver ID pairing/connect button → on the top of the
-
dongle receiver
Keyboard ID pairing/connect button→ on the bottom of the
-
keyboard
ID pairing procedures:
1. Press and hold the ID pairing/connect button on the top of the dongle
receiver about 5 seconds until the receiver LED flashes. The receiver LED will
flash 60 seconds to wait for keyboard pairing information. (If you release the
button within 5 seconds, the ID doesn't make any changes.)
2. Hold the keyboard close to the dongle receiver within 1M.
3. Press and hold the keyboard ID pairing/connect button on the bottom of the
keyboard about 5 seconds until the keyboard LED flashes. (If you release the
button within 5 seconds, the ID pairing will fail.)
4. The receiver LED indicator flashes rapidly as its ID paired with this keyboard.
Then you could press any key to check if the keyboard works or not.
Note:
- The whole ID pairing procedure shall be completed within
60 seconds.
Make sure your PC is on and running when doing the
-
pairing procedure.
- You don't have to pair ID again after changing batteries. If it
can't work, please follow the steps above to pair ID.
-
The keyboard can operate freely up to a radius of about
10m from the receiver.
-
The keyboard battery life is up to 4.5 months.

Keyboard Hotkey Functions (from left to right)

1. MCE Start To quickly launch Media Center
Button
2.
Built-in mouse painter and Left/Right click.
Mouse
Painter
3.
Switch to Live TV to bring up Live TV on
Live TV
your computer screen or on a television
connected to your Media Center PC.
4.
Go to the electronic programming guide.
Guide
5.
Display the DVD menu
DVD
Menu
6.
Adjust the volume
Volume -
7.
Adjust the volume
Volume+
Quick Installation Guide
9. Back
10.
More
11. Record
12. Play
13.
Pause
14.
Stop
15. Rew/Fwd
16. Replay
Front View of
Power Button
ID Button
ID pairing/connect button on the top of the
ID Button
ID pairing/connect button on the bottom of the keyboard
Go to the previous screen.
Show information about the selected
item.
Record the TV Show to disk.
Play the selected song, album, play
list, recorded TV Show, or video.
Pause the currently playing media.
Press pause again to resume.
Stop the currently playing media.
Press play to start the track again from
the beginning.
Rewind/ Speed up the currently playing
media.
Rewind the position pointer and
Back View of
ID LED/
Battery Low