MEDI RENT LX9 Quick Setup Manual

© 2018 Medi-Rent Pty Limited
PH: 1300 726 666
Medi-Rent Pty Limited
ABN: 37 603 454 360
Unit 3, 61 Beauchamp Rd,
Matraville NSW 2036
P: 1300 726 666
F: 02 9316 9998
E: info@medirent.com.au
W: www.medirent.com.au
LX9 Quick Set-up Guide: Leg
PLEASE READ FIRST
1
Place the device somewhere easily
accessible. You may wear non-bulky clothes
under the LX9 sleeve. Do not wear your
compression garment.
3 4
Connect cuff hose to the device and the
Position your body on a bed or couch
smaller end of the hose to the cuff.
where yourleg/s is/are elevated and
supported.
6 7
If you need to widen your garment, attach Fasten cuff zip and Velcro tabs.
the extension zipper onto the main garment's
zipper before putting the garment on. You
may add up to three extension zippers if
required.
2
Plug your power lead in, ensuring it is not a
trip hazard. (Often you will need to visit the
bathroom during treatment due to the fluid
extraction).
5
Place your leg into the sleeve by unzipping
it part-way.
8
Turn the controller on by pressing "Power".