Advertisement

PROJECT NAME
ANUBIS
BASED ON
Basic Audio Scarab Deluxe
EFFECT TYPE
Fuzz / Distortion
PROJECT SUMMARY
An adaptation of the classic Tone Bender Mk. II circuit using silicon transistors and a Big Muff-style tone
control.
Actual size is 2.3" x 1.86" (main board) and 1.78" x 0.87" (bypass board).
ANUBIS SILICON FUZZ
BUILD DIFFICULTY
Easy
DOCUMENT VERSION
1.0.0 (2021-02-19)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ANUBIS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for aion ANUBIS

  • Page 1 1.0.0 (2021-02-19) PROJECT SUMMARY An adaptation of the classic Tone Bender Mk. II circuit using silicon transistors and a Big Muff-style tone control. Actual size is 2.3” x 1.86” (main board) and 1.78” x 0.87” (bypass board). ANUBIS SILICON FUZZ...
  • Page 2: Table Of Contents

    INTRODUCTION The Anubis Silicon Fuzz is an adaptation of the Basic Audio Scarab Deluxe, first released in 2010 as the successor to the original Scarab, which was in turn based on the Hot Silicon, a classic circuit in the DIY community that adapts the Tone Bender Mk.
  • Page 3: Parts List

    Film capacitor, 7.2 x 2.5mm 100uF Electrolytic capacitor, 6.3mm 100n MLCC capacitor, X7R 1N5817 Schottky diode, DO-41 2N5088 BJT transistor, NPN, TO-92 2N5088 BJT transistor, NPN, TO-92 2N5088 BJT transistor, NPN, TO-92 2N5088 BJT transistor, NPN, TO-92 ANUBIS SILICON FUZZ...
  • Page 4 Switchcraft 112BX or equivalent. 1/4" mono 1/4" phone jack, closed frame Switchcraft 111X or equivalent. 2.1mm DC jack, 2.1mm panel mount Mouser 163-4302-E or equivalent. 3PDT Stomp switch, 3PDT 125B Enclosure, die-cast aluminum Can also use a Hammond 1590N1. ANUBIS SILICON FUZZ...
  • Page 5: Schematic

    SCHEMATIC 100R 1N5817 100uF 100n 2N5088 2N5088 100n 2N5088 2N5088 ANUBIS SILICON FUZZ...
  • Page 6: Drill Template

    -0.775, y: +1.71 x: 0, y: +1.71 x: +0.775, y: +1.71 ø9/32” ø9/32” ø9/32” BIAS BODY x: -0.775, y: +0.41 x: +0.775, y: +0.41 ø9/32” ø9/32” CENTER (0,0) FOOTSWITCH x: -0.775, y: -1.20 x: 0, y: -1.20 ø5/16” ø15/32” ANUBIS SILICON FUZZ...
  • Page 7: Enclosure Layout

    ENCLOSURE LAYOUT Enclosure is shown without jacks. See next page for jack layout and wiring. 125B ANUBIS SILICON FUZZ...
  • Page 8: Wiring Diagram

    WIRING DIAGRAM N.C. N.C. OUT GND +V +V JACK GND JACK GND GND PCB 125B ANUBIS SILICON FUZZ...
  • Page 9: Document Revisions

    (In other words: you don’t have to go out of your way to advertise the fact that you use these PCBs, but please don’t go out of your way to hide it. The guitar effects industry needs more transparency, not less!) DOCUMENT REVISIONS 1.0.0 (2021-02-19) Initial release. ANUBIS SILICON FUZZ...

Table of Contents