Bosch WTG86400SA Installation And Operating Instructions Manual page 23

Buttons
E 3 sec.
(Childproof lock)
Start/Pause
Explanations and notes
You can secure the dryer against inadvertent changing of the set functions. To do
this, activate the childproof lock after cycle start.
To Activate/Deactivate, touch Time Dry and Finish in buttons at the same time for 3
seconds. In the display field, you will see the E symbol light indicating the childproof
lock is active.
The childproof lock will remain activated until the next cycle start even after
Note:
switching the machine off. You must deactivate the childproof lock before the next cy-
cle and, if necessary, activate it again after starting the cycle.
Starts or pauses the selescted cycle;
indicator lamp on (steady) - cycle running, can be paused;
indicator lamp blinking - options can be changed; cycle can be started; door is
closed; childporoof lock is active; cycle is in Pause mode.
Programs and buttons
en
23