3) Rise Time Check
Œ Play back the alignment tape.
´ Set to playback mode, and confirm that the waveform of PB RF signal rises flat within 3 seconds.
Also confirm that the tape is not twisted or curled around the Pinch Roller. (Fig. 4-15)
ˇ Run the tape in CUE/REV and FF/REW modes, then playback.
Confirm the waveform of PB RF signal rises flat within 3 seconds. Also confirm that the tape is not twisted or
curled around the Pinch Roller.
¨ Repeat steps 2. and 3.
4) Tape Path Check
Œ In CUE and REV modes, check that the tape is not curled around the P1, P3, P5 upper flange and P7
upper/Lower flanges.
P7 CAPSTAN P5
Fig. 4-15
P1
FROM THE S REEL
Samsung Electronics
All manuals and user guides at all-guides.com
P3
P2
P3
Fig. 4-16
Alignment and Adjustments
P5
FROM THE T REEL
P7
4-9