Huawei RU3832 Installation Manual page 73

RRU3832&RRU3632
Installation Guide


Context
Figure 8-20
When the width of the narrower edges of the U-steel is less than 40 mm (1.57 in.), only the a
and b modes are supported.
Figure 8-20 Top view of the RU
(1) U-steel
Procedure
Step 1 Determine a position for installing the mounting brackets.


Issue 05 (2014-06-30)
Do not stand the RU upright because the RF ports cannot support the weight of the RU.
Place a foam pad or cardboard under the RU to protect the RU housing from damage
during the installation.
shows the top view of the RU installed on U-steel.
If the RU must be installed on U-steel secured on a tower, see
Single RU to determine a position.
If the RU must be installed on U-steel secured on the ground, see
determine a position.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing the RU
3.5.1 Clearance for a
Figure 8-21 to
64