Huawei RU3832 Installation Manual page 18

RRU3832&RRU3632
Installation Guide
Item
(3) Indicators



Table 3-2
Table 3-2 Usage of RF ports for RU3832
Product Version
DBS3900 WCDMA
V200R013C00
DBS3900 WCDMA
V200R014C00 and
later versions
Issue 05 (2014-06-30)
Silkscreen
RET
RUN
ALM
ACT
VSWR
CPRI0
CPRI1
The port for transmitting RET signals is determined by the software.
For the RU3832, CPRI0 is connected to the BBU or an upper-level RU and CPRI1 is connected to a
lower-level RU.
For the RU3632, CPRI0 is connected to the BBU and the CPRI1 is reserved.
describes how to use RF ports for RU3832.
TX/RX
Channe
l
1 x
2T2R
1 x
1T2R
1 x
2T2R
1 x
2T4R
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Information About the Installation
Remarks
Communication port for the RET antenna,
supporting RET signal transmission
See 3.3 RU
Number
Usage
of Used
RF Ports
2 ANT_TX/RXA and
ANT_TX/RXB are used
together.
2 It is recommended that
ANT_TX/RXA and
ANT_RXC be used
together.
You can also use
ANT_TX/RXB and
ANT_RXD together.
2 ANT_TX/RXA and
ANT_TX/RXB are used
together.
4 ANT_TX/RXA,
ANT_TX/RXB,
ANT_RXC, and
ANT_RXD are used
together for one sector,
with ANT_TX/RXA and
ANT_RXC combined and
ANT_TX/RXB and
Indicators.
Remarks
A single
sector
A single
sector
A single
sector
A single
sector
9