Coulisse MOTION CM-08 Manual

MOTION CM-08 LI-ION END MOTOR
Advanced options
19 Manual control
In case there is no remote control or pull control, the blind can
be operated with the program button on the motor.
Hold the program button to manually operate
20.1
the blind.The blind will move as long as the
button is being pressed. (max. 15 sec.)
To move the blind in opposite direction, release
20.2
the program button and repeat step 19.1.
20 Single select 5 channel remote
Single select makes it possible to activate program mode on a single blind through a
remote control, without having to physically press the program button on the blind.
1 1
To activate
20.1
Single select
+
simultaneously
hold the centre
button and press
the pair button.
Once a blind is found the
To search for
20.3 20.4
channel LED will flash the next blind
and the blind starts press the right
stepping, indicating that button. Search
program mode has been mode will be
activated. The blind activated.
can now be (un)paired To find the
to the remote and/or previous blind
programmed. press the left
button.
The remote starts searching
20.2
for blinds (search mode).
This is indicated by the LED's
flashing from left to right.
To exit
20.5
Single select
press the
right button
during
search
mode.
MOTION CM-08 LI-ION END MOTOR
21 Single select 15 channel remote
Single select makes it possible to activate program mode on a single blind through a
remote control, without having to physically press the program button on the blind.
11
To activate Single
21.1
select simultaneously
hold the centre +
button and press the
pair button.
1 1 1 1
Once a blind is found
To search for
21.3 21.4
the channel number the next blind
will flash and the press the right
blind starts stepping, button. Search
indicating that mode will be
program mode has activated.
been activated. The To find the
blind can now be (un) previous blind
paired to the remote press the left
and/or programmed. button.
1
The remote starts
21.2
searching for blinds
(search mode). This
is indicated by the
horizontal bars on the
remote.
1 1
To exit Single
21.5
select press
the right
button during
search mode.
The display
shows the
letter O.
1