Tcp/Ip Settings; Lan Interface - PRO-NETS WR514R User Manual

Please note, DEF_XXX_XXX means these MIBs will be stored as default settings. Others will
be saved as current setting. "WLANn_XXXX", where 'n' could be 0 or 1 represented as 1st
and 2nd wlan interface. By default, 1st wlan interface will use the 8186 internal wlan controller,
and 2nd interface will base on external wlan adapter through 8186 PCI interface.

3.5 TCP/IP Settings

3.5.1 LAN Interface

This page is used to configure the parameters for local area network which connects to the
LAN port of your Access Point. Here you may change the setting for IP addresses, subnet
mask, DHCP...etc.
46