Table of Contents
Advertisement
3. Setup Wireless Router Configurations via Web Browser
The Wireless Router comes with a web-based configuration utility. Users can access
this configuration utility from any of client system within Wireless Router's LAN. For best
results, either use Microsoft Internet Explorer 5.0 or later, or Netscape Navigator 4.7 or
later.
Before you start configuring your Wireless Router, you have to get following
information from your ISP:
a) Has your ISP assigned you a static IP address, or they will assign one to you
dynamically? If you have received a static IP address, what is it?
b) Does your ISP use PPPoE? If so, what is your PPPoE username and password?
If you are not sure of above questions, please contact your ISP.
3.1 Start your Web Browser
To use the Web-Based Utility, you have to launch your Internet Browser (MS IE 5.0 or
later, Netscape Navigator 4.7 or later).
Step1:
Enter Wireless Router default IP address
field then hit Enter key:
Step2:
Login dialog box will appear, enter admin as User Name and default
password is 1234, then click "OK" to login web-based utility.
http://192.168.1.1
19
in the Address
Advertisement
Table of Contents
