Table of Contents
Advertisement
after the first one-minute application is complete, the device will pause automatically.
STEP 4
Dispense an additional three pumps onto the conductive surface of the device, and spread
evenly over the other half of the face. swipe up the full length of the touch surface. the device
will resume gently vibrating. Continue using slow, upward and outward motions for the
remaining minute.
the device will automatically turn off after completing a full application cycle. Once
STEP 5
application is complete, massage excess into skin, then follow with your daily skincare routine.
10
touch surface
1 min
at any time, simply swipe down over the full length of the touch
To PAuSE APPlIcATIoN
surface. swipe back up full length of touch surface to resume.
pause
During usage, you can stop the device at any time by swiping
To SToP APPlIcATIoN mANuAlly
down the full length of the touch surface two times.
agelOC Boost was designed to slowly glide across the skin ' s surface during use
PlEASE NoTE:
and should not be held in one spot. If you experience any prolonged redness or abnormal irritation,
discontinue use immediately and seek medical advice if necessary.
resume
X2
11
Advertisement
Table of Contents
