Troubleshooting Guide - Seeley Braemar Invertair SACV10D1S Owner's Manual

TROUBLESHOOTING GUIDE

Symptom
The air conditioner does not run
'Clicking' sound is heard from
the air conditioner
Note!
subject to change without notice. Unit colour may vary slightly from that depicted in this booklet.
with industry standards, and local, state and national regulatory codes, are the responsibility of the
installer.
Information in this booklet was true and correct at the time of publishing. E & OE
Cause
Power failure.
Fuse blown or circuit breaker open.
Thermostat adjustment too high (in
cooling mode).
The room was probably very hot
when you started the system.
In heating or cooling operation
any plastic parts may expand or
shrink due to a sudden temperature
change in this event, a clicking
sound may occur.
Action
Wait for power to resume.
Replace the fuse or reset the
breaker.
Check thermostat setting.
Wait a while so the unit has enough
time to cool the room.
This is normal.
SEELEY INTERNATIONAL - OWNER'S MANUAL |
9