Advertisement
Available languages
Available languages
Cycle Settings Con't
Auto Temperature Control
Improves washer performance by utilizing sensors to pre-
cisely measure water temperatures. Water temperature
can be affected by the water heater setting and its dis-
tance from the washer, water usage in other parts of the
home and seasonally low ground water temperatures in
some geographic areas. Because detergents work best
in wash water at a minimum of 65° F, select settings with
the
symbol for regulated wash and final rinse water
temperatures.
Hot
120° F
Warm
90° F
Cold
65° F
Final Spin Speed
The High, Medium and Low spin speeds have been
developed for each cycle. The speeds will vary from
cycle to cycle. For example, High Speed in the Normal
cycle is much faster than High Speed in the Handwash
cycle.
•
Increasing spin speed will extract more water and
decrease drying time.
•
Decreasing spin speed will reduce wrinkling.
•
HANG DRY is available with some cycles to gently spin
items that should not be machine dried.
•
Use NO SPIN to omit the final spin at the end of the
cycle. The load will be very wet. Remove items from
the wash drum to drip dry or select DRAIN / SPIN to
remove excess water at a more convenient time.
Soil Level
Select HEAVY SOIL to increase the wash time or LIGHT
SOIL to decrease the wash time in some cycles.
Cycle
Heavy Soil
Heavy
+ 2 minutes
Normal
+ 2 minutes
Perm Press
+ 2 minutes
Water Level
There is no need to select a water level. The washer auto-
matically adjusts the water level to the type and size of
wash load.
Cycle Options
To select or delete the Press Saver, Extra Rinse, Extra
Spin or Cycle Signal, press OPTIONS until the blinking
light indicates the desired option. Then, while it is
blinking, press SELECT. The indicator will light when
the option has been selected. It will no longer be
lighted when the option has been deleted. To provide
the best care for your laundry items, not every option is
available with every cycle.
Press Saver
Adding the Press Saver option alters the spin pattern of
the cycle to further reduce wrinkling.
Extra Rinse
Use this option when additional rinsing is desired to re-
move excess dirt and detergent. It is recommended for
heavily soiled loads or if household members have sensi-
tive skin. Extra Rinse occurs before the final rinse when the
liquid fabric softner is dispensed.
Extra Spin
Use this option to add several additional minutes to the
final spin at the selected speed. This will improve water
extraction and decrease drying time.
Cycle Signal
A signal will sound at the end of the cycle when the cycle
signal is selected.
Washer Features
Delay Start
Press Delay Start to select a wash time convenient to your
schedule or during off peak energy hours. The start of the
cycle can be delayed for up to 12 hours.
Control
To avoid having someone accidentally start or stop the
washer, press OPTIONS and SELECT at the same time
until the Control
indicator is lighted. To unlock the
controls, press OPTIONS and SELECT again.
Estimated Time
The estimated total cycle time will be displayed when
the cycle is selected. The time may increase if water
pressure is low or the load becomes unbalanced. The
approximate time remaining will be displayed during
the cycle.
Status Lights
The following will be displayed at the appropriate times
during the cycle:
•
Door Lock
•
Wash
•
Rinse
•
Final Spin
•
Control
PN 134457800 (0501)
Advertisement
