HiLook IPC-T220H-U Quick Start Manual
  1. Manuals
  2. Brands
  3. HiLook Manuals
  4. Security Camera
  5. IPC-T220H-U
  6. Quick start manual

HiLook IPC-T220H-U Quick Start Manual

Network turret camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Turret Camera
Quick Start Guide
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPC-T220H-U and is the answer not in the manual?

Questions and answers

Related Manuals for HiLook IPC-T220H-U

Summary of Contents for HiLook IPC-T220H-U

  • Page 1 Network Turret Camera Quick Start Guide...
  • Page 2 Network Turret Camera·Quick Start Guide Quick Start Guide COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be "Hikvision"). This user manual (hereinafter referred to be "the Manual") cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of...
  • Page 3 Network Turret Camera·Quick Start Guide Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY.
  • Page 4 Network Turret Camera·Quick Start Guide IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
  • Page 5 Network Turret Camera·Quick Start Guide This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
  • Page 6 Network Turret Camera·Quick Start Guide Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into "Warnings" and "Cautions" Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 7 Network Turret Camera·Quick Start Guide the restrictions applied to the location and about any precautions that shall be taken. ● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 8 Network Turret Camera·Quick Start Guide ● Do not touch sensor modules with fingers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, please replace the lens cap to protect the sensor from dirt.
  • Page 9 Network Turret Camera·Quick Start Guide only. Dispose of used batteries according to the instructions provided by the battery manufacturer. ● If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)

  • Page 10: Table Of Contents

    Network Turret Camera·Quick Start Guide Table of Contents 1 Appearance Description ............... 10 2 Installation ..................14 2.1 Memory Card Installation ..........14 2.2 Ceiling Mounting ............15 2.3 Mounting with Junction Box.......... 18 2.4 Mounting with Inclined Base ......... 20 2.5 Wall Mounting ..............

  • Page 11: Appearance Description

    Network Turret Camera·Quick Start Guide 1 Appearance Description Type I: Figure 1-1 Type I Turret Camera Overview Description Description Enclosure Camera Body Mounting Base Power Cord Network Cable...
  • Page 12 Network Turret Camera·Quick Start Guide Type II: Figure 1-2 Type II Turret Camera Overview Description Description Enclosure Lens Camera Body Mounting Base Network Cable...
  • Page 13 Network Turret Camera·Quick Start Guide Description Power Cord Front Cover Type III: Figure 1-3 Type III Turret Camera Overview Description Description Enclosure...
  • Page 14 Network Turret Camera·Quick Start Guide Description Lens Camera Body Mounting Base Network Cable Power Cord Memory Card Slot Cover Front Cover Note: For cameras support power over Ethernet (PoE), the power is passed along with data on Ethernet cabling. And a switch supports PoE function is required.

  • Page 15: Installation

    Network Turret Camera·Quick Start Guide 2 Installation Before you start: ● Make sure the device in the package is in good condition and all the assembly parts are included. ● The standard power supply is 12 VDC, make sure your power supply matches with your camera.

  • Page 16: Ceiling Mounting

    Network Turret Camera·Quick Start Guide Unscrew the Cover and Insert Memory Card 3. Insert the memory card into the memory card slot. 4. (Optional)To unmount the memory card, push to get it ejected. 5. Screw the cover back to the camera. Ceiling Mounting Note: Three types of the camera share the same installation method, we...
  • Page 17 Network Turret Camera·Quick Start Guide Note: Drill the cable hole, when adopting ceiling outlet to route the cable. Figure 2-2 The Drill Template 3. Disassemble the camera. 1). Rotate the camera to align the notch to one of the marks. 2).
  • Page 18 Network Turret Camera·Quick Start Guide In the supplied screw package, both self-tapping screws, and  expansion bolts are contained. If the ceiling is cement, expansion bolts are required to fix the  camera. If the ceiling is wooden, self-tapping screws are required.

  • Page 19: Mounting With Junction Box

    Network Turret Camera·Quick Start Guide 8. Power on the camera, and set the network configuration (for details, refer to 3 Set the Network Camera over the LAN and 4 Access via Web Browser) to check whether the image is gotten from the optimum angle.
  • Page 20 Network Turret Camera·Quick Start Guide this section. And you can take steps of wall mounting as a reference for the ceiling mounting. Steps: 1. Paste the drill template (supplied) to the desired mounting position on the wall. 2. Drill the screw holes and the cable hole in the wall according to the drill template.

  • Page 21: Mounting With Inclined Base

    Network Turret Camera·Quick Start Guide 4. Secure the junction box's body on the wall with four PA4 × 25 screws. Figure 2-9 Secure the Junction Box's Body on the Ceiling/Wall 5. Combine the junction box's cover with its body with supplied screws.
  • Page 22 Network Turret Camera·Quick Start Guide Steps: 1. Paste the drill template to the wall. 2. Drill screw holes and the cable hole (optional) on the wall according to the supplied drill template. Note: Drill the cable hole, when adopting ceiling outlet to route the cable Figure 2-10 Drill Template 3.

  • Page 23: Wall Mounting

    Network Turret Camera·Quick Start Guide 5. Install the inclined base's body on the ceiling/wall with four PA4×25 screws. Figure 2-12 Fix the Inclined Base's boy on Ceiling/Wall 6. Combine inclined base's cover with its body with supplied screws. 7. Repeat steps 5 to 8 of 2.2 Ceiling Mounting to complete the installation.

  • Page 24: Waterproof Measures

    Network Turret Camera·Quick Start Guide Figure 2-13 Install the Wall Mounting Bracket 4. Install the mounting base of the turret camera to the wall mounting bracket and secure them with supplied screws Figure 2-14 Install the Mounting Base on the Wall Mounting Bracket 5.

  • Page 25: Install Network Cable Waterproof Jacket

    Network Turret Camera·Quick Start Guide 2.6.1 Install Network Cable Waterproof Jacket Align Install Waterproof Jacket Figure 2-15 Steps: 1. Feed the network cable through ① and ③ in order. 2. Fix ② on the network cable between ① and ③. 3.
  • Page 26 Network Turret Camera·Quick Start Guide Waterproof Cables...

  • Page 27: Set The Network Camera Over The Lan

    Network Turret Camera·Quick Start Guide 3 Set the Network Camera over the Note: You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.

  • Page 28: Activate The Camera

    Network Turret Camera·Quick Start Guide Activate the Camera You are required to activate the camera first by setting a strong password for it before you can use the camera. Activation via web browser, activation via SADP, and activation via client software are all supported. We will take activation via SADP software and activation via web browser as examples to introduce the camera activation.
  • Page 29 Network Turret Camera·Quick Start Guide Activation Interface (Web) 3. Create a password and input the password into the password field. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 30: Activation Via Sadp Software

    Network Turret Camera·Quick Start Guide 5. Click OK to save the password and enter the live view interface. Activation via SADP Software SADP software is used for detecting the online device, activating the camera, and resetting the password. Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts.

  • Page 31: Modify The Ip Address

    Network Turret Camera·Quick Start Guide 3. Create and input the new password in the password field, and confirm the password. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 32 Network Turret Camera·Quick Start Guide 1. Run the SADP software. 2. Select an active device. 3. Change the device IP address to the same subnet with your computer by either modifying the IP address manually or checking the checkbox of Enable DHCP. Modify the IP Address Note:...
  • Page 33 Network Turret Camera·Quick Start Guide You can enable the HiLookVision service for the device during activation. Refer to Chapter 5.1 for detailed information. 4. Input the admin password and click Modify to activate your IP address modification. The batch IP address modification is supported by the SADP. Refer to the user manual of SADP for details.

  • Page 34: Access Via Web Browser

    Network Turret Camera·Quick Start Guide 4 Access via Web Browser System Requirement: Operating System: Microsoft Windows XP SP1 and above version CPU: 2.0 GHz or higher RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 8.0 and above version, Apple Safari 5.0.2 and above version, Mozilla Firefox 5.0 and above version and Google Chrome 18 and above version Steps:...
  • Page 35 Network Turret Camera·Quick Start Guide 4. Click Login. Login Interface 5. Install the plug-in before viewing the live video and managing the camera. Follow the installation prompts to install the plug-in. Note: You may have to close the web browser to finish the installation of the plug-in.

  • Page 36: Operate Via Hilookvision App

    Network Turret Camera·Quick Start Guide 5 Operate via HiLookVision App Purpose: HiLookVision is an application for mobile devices. With the App, you can view live image of the camera, receive alarm notification and so Note: HiLookVision service is not supported by certain camera models. Enable HiLookVision Service on Camera Purpose: HiLookVision service should be enabled on your camera before using...

  • Page 37: Enable Hilookvision Service Via Web Browser

    Network Turret Camera·Quick Start Guide Verification Code Setting (SADP) Note: The verification code is required when you add the camera to HiLookVision app. 3. Click and read "Terms of Service" and "Privacy Policy". 4. Confirm the settings. 5.1.2 Enable HiLookVision Service via Web Browser Before you start: You need to activate the camera before enabling the service.
  • Page 38 Network Turret Camera·Quick Start Guide 2. Enter platform access configuration interface: Configuration > Network > Advanced Settings > Platform Access. Platform Access Configuration (Web) 3. Select Platform Access Mode as HiLookVision. 4. Check the checkbox of Enable. 5. Click and read "Terms of Service" and "Privacy Policy" in pop-up window.

  • Page 39: Hilookvision Setup

    Network Turret Camera·Quick Start Guide HiLookVision Setup Steps: 1. Download and install the HiLookVision app by searching "HiLookVision" in App Store or Google Play 2. Launch the app and register for a HiLookVision user account. 3. Log in HiLookVision app after registration. Add Camera to HiLookVision Before you start: You need to enable the HiLookVision service on camera before...
  • Page 40 Network Turret Camera·Quick Start Guide You can find the QR code on the camera or on the cover of the Quick Start Guide of the camera in the package. Figure 5-4 Scan QR Code Note: If the QR code is missing or too blur to be recognized, you can also add the camera by tapping the icon and inputting the camera's serial number.

  • Page 41: Initialize The Memory Card

    Network Turret Camera·Quick Start Guide Initialize the Memory Card Check the memory card status by tapping on the Storage Status in the Device Settings interface. If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal. You can then start recording any event triggered video in the camera such as motion detection.
  • Page 42 UD14162B...

Table of Contents