Refresh Time; Save Information; Log In; 5Th Parameter - Gira HomeServer 0529 00 Manual

2.8.4

Refresh time

Input field, in example R1. Abbreviation.
If a change is caused with an element in the visualisation, for example a light is switched on,
an automatic refresh of the page (the status of the object concerned is determined and
shown on the visualisation) is carried out at intervals that double each time. This takes place
until a period of time has passed which was entered under the refresh time in the Expert
software.
Example:
5 minutes (= 300 seconds) are entered as a refresh time. Then an automatic refresh is carried
out after 2, 4, 8, 16, 32, 64, 128 and 256 seconds.
2.8.5

Save information

Checkbox. If this checkbox is activated, the user name and password, as well as all other
settings are saved on the device as a cookie
2.8.6

Log in

Button. By clicking on this button, the user logs in on the HomeServer or FacilityServer with
the information previously entered and starts the visualisation following a successful login
process.
2.8.7

5th parameter

There is one additional parameter in the startguest.htm file which, however, has no input
field on the Login mask.
05.2012/V 1.2
RemoteVisu
23