Table of Contents
Advertisement
POWER
1. Turn on the ignition to power up the Infotainment Center. The buttons on the front of the unit light
up. When the Infotainment Center is started up, it will immediately go to the last mode (memory on
playback) before it was turned off.
2. In order to put the unit in standby mode, please press the Power button (PWR) for more than 2
seconds. During standby, the display will show your vehicle graphic or be off. Your preference can be
set in the Settings menu (See page 10). Press the Power button again to start up again.
3. In order to turn the unit off completely remove ignition key and/or ensure any auxiliary battery power
to the system is turned off.
4. Quickly pressing the Power button will mute the audio on your system. Press again or a volume
button to resume audio.
MODE
1. Touch the Mode button to go to the Main Menu.
2. When in the Main Menu, use the touch screen to select the desired functionality.
3. You can also access the Main Menu from any screen by touching the function icon in the top left of
the current screen.
NOTE: When viewing video in full screen please touch the screen once to bring up the screen header
which will display the function icon. Touch the icon to return to the Main Menu.
DIM
1. Press to manually adjust the brightness of the LCD.
-/+ VOLUME CONTROL
1. The volume level can be adjusted on the front of the Infotainment Center display by using the volume
up and volume down buttons or by the steering wheel control buttons (optional).
2. The volume level can be muted completely by briefly pressing the PWR button on the front of the
Infotainment Center. The MUTE logo will appear the display.
PIP (Picture in Picture)
1. Your Infotainment Center is equipped with PIP. This button will toggle between PIP and full screen of
the active source (see page 11 for more details on this feature).
NAV
1. Press the NAV button to go to the navigation system.
2. While viewing your navigation press the NAV button to return to your active source. If you are
running a navigational route, voice audio voice prompts will continue to be heard over your speakers
according to the NAV audio settings you have selected in the settings menu (see page 10).
EJECT
1. By pushing the EJECT button, the LCD display will move to its lowest position. When a CD/DVD is in
the player, it will be ejected automatically. When the display is in the lowest position, a CD/DVD can
be inserted. Please note that the display will automatically go up again after a series of beep tones
unless beep tone has been turned off (see page 11).
Main Menu
The Infotainment Center is designed for simple
maneuvering throughout. The screen shown on the right
is the MAIN MENU screen. From here you can choose
which function to access by touching the appropriate
icon on the LCD display. To return back to the Main
Menu or change the active source touch the icon in the
top left corner of any screen.
If the device is left idle on the Main Menu or on any
system settings screen the video will revert back to the
active source (radio, etc.) after 15 seconds.
9
Advertisement
Table of Contents
