Camera (Optional) - Winnebago XSG2 Owner's Manual

11 Camera (Optional)

The Infotainment Center can be connected to an optional rearview camera or camera control box (for multiple
cameras) to enhance viewing around your vehicle while performing maneuvers. When connected, the camera
AV source can be displayed in two ways:
Manual Viewing:
By selecting the Camera icon from the Main Menu you can have full screen display of your rear camera. You
can also manually view your rear camera and navigation simultaneously using the Picture in Picture (PIP)
feature. (Please see page 11, Video Settings for more details)
Automatic Viewing:
The Infotainment Center can support automatic triggers to display cameras to assist you with reverse driving
and side blind spot viewing. While driving, if a turn signal or reverse gear signal is seen by the system the
display will change to full screen camera view, even from PIP function. If your rear camera is equipped with
audio, you can press the Audio icon on the LCD display while the camera video is displayed to change the audio
from the active source to the camera audio.
To turn off the camera audio press the icon again. Camera audio will also switch off once the trigger signal has
ended and the Infotainment Center has returned to the active source.
Note: These features are for assistance only and are not intended to replace the use of mirrors and help from
spotters. It is only a reference for you. Please use all available safety features and procedures to ensure proper
driving to avoid serious injury/death and damage to property.
24