Setup; General Settings - Winnebago XSG2 Owner's Manual

3 Setup

3.1

General Settings

Access the System Settings by using the Settings icon in the Main Menu. The first screen
shown is the first page of the system setup. The pages of the Settings menu can be
changed by using the on-screen button in the top right corner. To exit the Settings menu
at any time, press the Settings icon in the top left of the screen.
System Settings page one (1/2):
Tilt Position: This option allows the manual control of
the tilt mechanism behind the LCD screen. Here you can
set the angle of the LCD display.
Tilt Movement: The LCD panel will close during power
down and return to its set position if Auto is selected.
AUX Zone: This option selects the AV source for a display
connected to the AV output. The following sources can
be selected: Current/DVD/CAM/NAV/AUX/OFF. Audio
only sources of Radio/SIRIUS/iPod may be selected.
Control of most functions must be done from the main
screen.
AUX Zone Vol: Independent volume controls
Language: Here the language of the User Interface can be selected (English, Spanish, French).
Beep Tone: Turn ON/OFF audible sound when touching the LCD screen. The Beep Tone will also provide
warning of LCD display closing.
System Settings page two (2/2):
Rear View: This option selects whether a rear view
camera is connected. When ON the display will
automatically switch to camera mode when the reverse
gear is engaged or a trigger signal is received. When no
camera is connected, select OFF.
NOTE: Please use all available safety features and
procedures to ensure proper driving to avoid damage
and/or injury.
Standby Screen: Selecting ON, the Infotainment Center
will display your clock when the unit is powered off by pressing the PWR button while the vehicle remains on.
Auto Dim: Set to Auto, LCD will dim with your vehicle lighting, if equipped.
Touch Adjustment: This option allows the user to calibrate the touch screen accuracy. Follow the on-screen
directions step by step to complete the procedure. This procedure is only necessary when the accuracy of the
touch screen is not good.
Time Set: This option allows setting the time in the system displays.
Factory Set: With this option, the Infotainment Center can be reset to factory default.
Note: All stored settings, presets, SIRIUS lock code, etc., will be erased and return to original factory settings.
Locked/Skipped channels in SIRIUS will remain unchanged.
Note: Loss of power due to battery disconnect will cause a factory reset to automatically be performed during
the next start up of the Infotainment Center.
10